Ipswitch Forums / Technical Preview Programs / IMail Console Admin Prototype / Technical preview build 2 available / Latest Posts

RE: Technical preview build 2 available

Tripp Allen — Fri, 13 Apr 2007 12:59:15 GMT

Look at the first post on this thread: http://www.ipswitch.com/forums/shwmessage.aspx?ForumID=32&MessageID=29296 as there is an attached zip file which contains configuration information. The default port is 32469, and encryption is on by default.

RE: Technical preview build 2 available

karlgeeZ — Fri, 13 Apr 2007 12:29:49 GMT

The utility runs fine from the server but what are the port settings for using it remotely?

Karl L. Gechlik

_AskTheAdmiN.Com_

RE: Technical preview build 2 available

Adolpho — Thu, 29 Mar 2007 19:47:38 GMT

Tripp,

The downloaded file was the right one, has more than 10MB.

Uninstalling and reinstalling it did the trick, thanks.

Some observations with the new TP02 version:

This version is still not honoring the Encrypt variable set in the registry as per the instructions.

As in TP01 shows 6 in "Services | Queue Mgr | Tries before sent to gateway" while in the Web Administrator is set to 0

Also if the screen resolution is set to 800 x 660 many options don't appear and there is no way to scroll up or down.

Adolfo Justiniano
Santa Cruz BBS

RE: Technical preview build 2 available

Tripp Allen — Thu, 29 Mar 2007 05:53:34 GMT

What is the size of the tp02 file that you downloaded? It should be a bit over 10M. The problem with the old tp02 was the MS redistributables were not installed and the new build will install them. Please look at the date / size of the tp02 file so we can verify you have the correct file. If it is correct, can you uninstall and them reinstall?

RE: Technical preview build 2 available

Adolpho — Wed, 28 Mar 2007 22:01:54 GMT

Tripp,

Same problem with the new TP02:

Error Initializating.
System.DllNotFoundException: Unable to load DLL 'imailsec.dll': This application has failed to start because the aplication configuration is incorrect. Reinstallting the application may fix this problem. (Exception from HRESULT: 0x800736B1)
at IMailAPI_NET.DomainCollection.ReturnLbxDomainNames(IntPtr hWnd, Int32 nFlag)
at IMailAPI_NET.DomainCollection.get_DomainCount()
at IMailAPI_NET.DomainCollection.GetDomainCollection()
at IMailAPI_NET.DomainCollection..ctor()
at wadmin.WAdmin.Build_MainTabControl()

System event viewer shows:

Event Type: Error
Event Source: SideBySide
Event Category: None
Event ID: 59
Date: 3/28/2007
Time: 10:51:55 PM
User: N/A
Computer: ---
Description:
Generate Activation Context failed for C:\Program Files\Ipswitch\WAdmin Console for IMail\IMailsec.dll. Reference error message: The referenced assembly is not installed on your system.
.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: SideBySide
Event Category: None
Event ID: 59
Date: 3/28/2007
Time: 10:51:55 PM
User: N/A
Computer: ---
Description:
Resolve Partial Assembly failed for Microsoft.VC80.CRT. Reference error message: The referenced assembly is not installed on your system.
.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Adolfo Justiniano
Santa Cruz BBS

RE: Technical preview build 2 available

Tripp Allen — Wed, 28 Mar 2007 17:35:51 GMT

We have fixed the problem and updated the installer. Download again and reinstall; TP02 should work better for you this time.

RE: Technical preview build 2 available

Tripp Allen — Sat, 24 Mar 2007 16:19:04 GMT

Okay, I've duplicated it on one machine and could not duplicate on another. So, I'm pulling tp02 until I can get this figured out (the dll is says it's looking for is there). Keep a watch on the forum for when I repost TP02.

RE: Technical preview build 2 available

Adolpho — Sat, 24 Mar 2007 12:41:18 GMT

Tripp,

I'm having exactly the same problem that pupleT has, TP02 won't start showing the same errors (local & remote). I even uninstalled TP01 (all the files and the "WAdmin Console for IMail" were erased), installed TP02 and had the same problem. I had to revert to TP01.

Adolfo Justiniano
Santa Cruz BBS

RE: Technical preview build 2 available

purpleT — Sat, 24 Mar 2007 12:37:51 GMT

No, I did a "fresh" install of TP02 first. Both on the server running IMail and my workstation. Both computers give the same error.
After that I removed TP02 from the server, checked if the installer removed all files, and installed TP01. That one works...

RE: Technical preview build 2 available

Tripp Allen — Sat, 24 Mar 2007 12:26:16 GMT

So TP01 works, tp02 does not? Did you have tp01 installed before you isntalled tp02? I'm wondering if possibly some of the dlls in tp02 didn't overwrite the tp02 install.

RE: Technical preview build 2 available

purpleT — Sat, 24 Mar 2007 12:01:02 GMT

Thank you for your quick response.
I've tried that allready but didn't make any difference. I've also tried installing it on my local workstation to use the remote wadmin console, same error on there.

I've ran the filemon utily (http://www.microsoft.com/technet/sysinternals/utilities/filemon.mspx) and that reports wadmin.exe does read the .dll file:
439 4:44:01 PM wadmin.exe:1020 OPEN D:\WAdmin\imailsec.dll SUCCESS Options: Open Access: 00100021
440 4:44:01 PM wadmin.exe:1020 CLOSE D:\WAdmin\imailsec.dll SUCCESS
441 4:44:01 PM wadmin.exe:1020 OPEN D:\WAdmin\imailsec.dll.2.Config NOT FOUND Options: Open Access: 001200A9

After that I remove the TP02 and tried the TP01 version and that one works with no problem...

RE: Technical preview build 2 available

Tripp Allen — Sat, 24 Mar 2007 11:15:16 GMT

Make sure you are launching the wadmin program from within the directory that it's installed (it could be the working directory is not set correctly in the shortcut). Open explorer and go to that directory, then double click the wadmin.exe and see if it starts.

RE: Technical preview build 2 available

purpleT — Sat, 24 Mar 2007 09:16:07 GMT

Very excited to try this administrator console!

However I can't get it to work
I've installed it on a Win2k3 R2 32 bit server running imail server 2006.2, using the default program files directory. Both the local and remote package.
If I start the local package I get the following error:

Error Initializating.
System.DllNotFoundException: Unable to load DLL 'imailsec.dll': This application has failed to start because the aplication configuration is incorrect. Reinstallting the application may fix this problem. (Exception from HRESULT: 0x800736B1)
at IMailAPI_NET.DomainCollection.ReturnLbxDomainNames(IntPtr hWnd, Int32 nFlag)
at IMailAPI_NET.DomainCollection.get_DomainCount()
at IMailAPI_NET.DomainCollection.GetDomainCollection()
at IMailAPI_NET.DomainCollection..ctor()
at wadmin.WAdmin.Build_MainTabControl()

WAdmin is closing

Also the eventviewer is full of similair errors.

Event Type: Error
Event Source: SideBySide
Event Category: None
Event ID: 59
Date: 3/24/2007
Time: 2:06:20 PM
User: N/A
Computer: xxx
Description:
Generate Activation Context failed for C:\Program Files\Ipswitch\WAdmin Console for IMail\imailsec.dll. Reference error message: The referenced assembly is not installed on your system.
.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

---
Event Type: Error
Event Source: SideBySide
Event Category: None
Event ID: 59
Date: 3/24/2007
Time: 2:06:20 PM
User: N/A
Computer: xxx
Description:
Resolve Partial Assembly failed for Microsoft.VC80.CRT. Reference error message: The referenced assembly is not installed on your system.
.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

The mentioned dll is however in the program directory. Do I manually need to register that dll or something?

Technical preview build 2 available

Tripp Allen — Fri, 23 Mar 2007 14:55:56 GMT

TP02 is now available and can be downloaded here: http://preview.ipswitch.com/preview/messaging/WAdmin/WAdmin_TP02.exe

We initially had some install problems reported with TP02. These problems resulted from differences in the version of the Microsoft redistributables between IMail 2006.2 and the WAdmin executables. The WAdmin install will now update the redistributables and we have updated the install so you will need to download it again if you have already downloaded TP02.

This version resolved the issue of domain users loading slowly in the users tab and the bulk edit users tab. Now, loading of the users is threaded so the list will continue to grow until all the users have been loaded. Updating and viewing of individual users will still function while the user list is loading.

Four additional options were added to the Bulk Edit Users tab. These four functions allow the updaing of user's web client preferences. The options which can bed edited are:

Save copy of outgoing messages in sent folder.
Delete options (move to deleted folder or purge).
Default new message style.
Default message encoding.

Please continue to send any feedback or question you have to this Technical Preview Program forum.

- IMail Server 2006.2 must be installed, before you install WAdmin Console. To download IMail Server 2006.2, go to: http://www.ipswitch.com/products/imail/index.asp

- Do not install the WAdmin Console in the same directory as IMail Server.